Novus No. 2 Fine Scratch Remover is great for use as general fine scratch remover from acrylic, auto headlights, boats, motorcycles, golf cart windshields and much more. With repeated use, Novus #2 Fine Scratch Remover is the perfect solution for restoring faded and discolored plastics and acrylics. It removes fine scratches instead of just filling them in.
Remove fine scratches, haziness and abrasions from many plastics.
Container size: 8 fluid ounces, plastic bottle
* Novus #2 contains abrasives and is not for use on eyeglasses, polycarbonate, or coated plastic surfaces (if unsure about a surface's compatibility with Novus 2, test in a small inconspicuous area).
Do not use paper towels when cleaning or polishing plastics. Paper towels can scratch plastic surfaces.
Download Novus #2 Instructions
Download Novus #2 Safety Data Sheet
Novus Products Table
|
Product
|
Uses
|
Application
|
|
Novus #1
|
Acrylic / plexiglass, polycarbonate,
cd/dvd's, aquariums, boat windshields, motorcycle windshields, and many other products with hard shiny surfaces.
|
Cleans only. Helps to reduce dust and static. Reduce fingerprints.
|
|
Novus #2
*
|
Acrylic / plexiglass, cd/dvd's, acrylic aquariums, car headlights, motorcycle windshields, golf cart windshields, boat windshields, and many other products.
|
Remove fine scratches and light imperfections in clear acrylics.
Removes haziness and abrasions from many types of plastics.
|
|
Novus #3
*
|
Acrylic / plexiglass, helmet shields, acrylic aquariums, motorcycle windshields, golf cart windshields, boat windshields, and other items.
|
Heavy plastic scratch remover.
|
* Novus #2 and #3 contains abrasives and is not for use on eyeglasses, polycarbonate, or coated plastic surfaces (if unsure about a surface's compatibility with Novus 2 & 3, test in small inconspicuous area).
Important Cleaning and Polishing Tips
Before attempting to clean or remove scratches, always make sure the plastic is cool to the touch. Use a liberal amount of placstic cleaner to safely remove surface dust and dirt. Test Novus #2 and #3 in a small, inconspicuous area for compatibility. Some plastics are coated with a thin film which may be damaged by the abrasives in Novus #2 and Novus #3. Both Novus #2 and #3 are not recommended for use on eyeglass lenses.
For best results, use nonabrasive, absorbent, lint free and disposable wipes. Avoid using polyester or rayon wipes. If Novus Polish Mates are not available, use a soft cloth, such as a cloth diaper.
If the damagte is fairly large or badly damaged, a power buffer may be used with Novus #2 and #3. Use a clean wool or cotton bonnet and operate the buffer at a low speed, approximately 1000 RPM, to avoid overheating the plastic. Each polish should be applied with a separate, clean bonnet.
