Navigate to the estreetplastics homepage
You are here: Home > Polycarbonate > Polycarbonate (Lexan) - Pebble Textured

Pebble Textured Polycarbonate (Textured 1 Side, Smooth 1 Side)

Pebble textured polycarbonate lexan is an excellent choice for obscuring vision and reducing glare. Our pebble textured polycarbonate sheet is a UV stabilized general purpose sheet. Polycarbonate sheets are extremely durable material that has a significantly higher impact and break resistance as compared to glass and acrylic. It is 200 times stronger than regular glass and 30 times stronger than acrylic.

Polycarbonate sheets can be used for a variety applications, especially those heavy-duty applications that require added strength needed in a plastic sheet product. Textured polycarbonate can be used for privacy glazing, light diffusers, shower doors, commercial applications, DIY projects, and other demanding applications. Polycarbonate can be formed and machined, including drilling holes, sawing and routing.

Our pebble textured polycarbonate sheets have a texture finish on one side and a smooth finish on the other side. These sheets are translucentTranslucent sheets allow light to pass through, but are not transparent. Shapes cannot be seen in detail. and do not have a masking on both sides of the panel.

We carry pebble textured polycarbonate sheets in a variety of pre-cut sizes to satisfy the creative needs of many projects. We can also cut to size.

Applications: privacy glazing, light diffusers, shower doors, walkways, fencing, office partitions, commercial applications, DIY projects, robotics, cabinet doors, bathroom partitions, appliance partitions, and many other applications.

Key Characteristics of Pebble Textured Polycarbonate:

  • High Impact Resistance: Polycarbonate sheets are almost unbreakable, with an impact resistance significantly higher than glass or acrylic.
  • Light Transmission: >70% light transmission.
  • UV Stabilized: UV stabilized to help mitigate effects of ultraviolet light exposure. Note this is not the sames as UV resistant.
  • Lightweight: Lighter than glass and easier to handle, transport, and install.
  • Durability: Maintain physical properties over a wide range of temperatures and conditions.
  • Flexibility: Polycarbonate can be easily thermoformed or cold bent into curved shapes, allowing for architectural creativity.
  • Easy to Fabricate and Install: Can be cut, drilled, and installed with standard tools, making them suitable for DIY projects.
  • Dimensional Stability: Exhibits minimal thermal expansion and contraction.

The Term lexan is commonly used to describe polycarbonate. Actual name brand will depend on current stock.

Pebble Textured Polycarbonate (Textured 1 Side, Smooth 1 Side)


Light Transmission>70%
Specific Gravit1.2
Refractive Index1.586
Water Absorption, 24 hours0.15%
Poisson’s Ratio (elastic deformation in directions perpendicular to direction of applied force)0.38
Tensile Strength, Ultimate (psi)9500
Tensile Strength, Yield (psi)9000
Tensile Modulus (psi)340,000
Elongation (%)110
Flexural Strength (psi)13,500
Flexural Modulus (psi)345,000
Compressive Strength (psi)12,500
Compressive Modulus (psi)345,000
Shear Strength, Ultimate (psi)10,000
Shear Strength, Yield (psi)6,000
Shear Modulus (psi)114,000
Rockwell HardnessM70 / R118
Coefficient of Thermal Expansion (in/in/°F)3.75 x 10-5
Coefficient of Thermal Conductivity (BTU·in/hr·ft²·°F)1.35
Heat Deflection Temperature @ 264 psi270 (°F)
Heat Deflection Temperature @ 66 psi280 (°F)
Brittleness Temperature-200 (°F)
Dielectric Constant @ 10 Hz2.96
Dielectric Constant @ 60 Hz3.17
Volume Resistivity (Ohm·cm)8.2 x 1016
Dissipation Factor @ 60 Hz0.0009
Arc Resistance: Stainless Steel Strip electrode (seconds)10
Arc Resistance: Tungsten Electrodes (seconds)120
Horizontal Burn, AEB (in)<1
Ignition Temperature, Self1022 (°F)
Ignition Temperature, Flash824 (°F)

*All values referred to nominal 1/8" (.118"/3mm). These values are typical and should not be taken as specifications.

Quantity discounts available!

We offer discounts on our listed prices
with the purchase of 2 or more stock sheets.

2 to 5 - 3% off
6 to 10 - 5% off
11 to 20 - 10% off
21 to 30 - 12% off
31 to 40 - 13% off
41 to 50 - 14% off
51 or more - 15% off

We can also cut to size!

For custom cut to size or larger sheets of our pebbled textured polycarbonate, please email [email protected] for a quote.
When describing the custom size, please included the thickness, width, length and quantity.

We also offer custom cut-to-size, hole drilling, edge polishing, CNC cutting, circle, and shape cutting. Request a quote for these services.