Navigate to the estreetplastics homepage
.750"-Thick 12" x 12" - Delrin Sheet - Black

.750" x 12" x 12" - Delrin Sheet - Black

$0.00
  • Quantity discounts available!: Purchase more than one and save 3% to 15%!
Product Code: 9610751212
available to ship in 1 to 3 business days
View discounts

Delrin - Black (acetal homopolymer) plastic, also known as Polyoxymethylene or POM-H, is a type of engineering plastic known for it's high strength, dimensional stability, low friction, abrasion resistance, and stiffness. Delrin (acetal homopolymer) is a semi-crystalline thermoplasticThermoplastics are pliable or moldable when heated to a certain temperature and hardens upon cooling, allowing the plastic to be reshaped without significantly affecting its physical properties., as opposed to an amorphous thermoplastic polymer such as polystyrene and ABS. Semi-crystalline polymers exhibit organized and tightly packed molecular chains.


Allow +0 / -1/4" tolerance in width and length.

All four edges are saw cut.


Key Characteristics:

  • Mechanical Strength: Known for its high mechanical strength, rigidity, dimensional stability, abrasion resistance, and stiffness.

  • Low Friction and Wear Resistance: Delrin sheets typically have a smooth surface and are known for low coefficient of friction and excellent wear resistance, making it ideal for applications where parts are in motion, such as precision gears, bearings, and moving components in machinery.

  • Moisture & Chemical Resistance: Delrin has a lower density or porous center than acetal copolymer making Delrin more susceptible to creep from gases and liquids..

  • Machinability: Can be easily cut, shaped, and drilled for precision parts in mechanical applications.

  • Temperature/Flammability: Avoid using if material will be exposed to long-term temperatures greater than 194 degrees, or prolonged submersion in hot water above 140 degrees. Should not be used in applications that require flammability rating above UL94 HB.

Applications: industrial applications, gears, bushings, rollers, valves, bearings, automotive industry, consumer electronics, and many other applications.


Acetal (copolymer) vs Delrin (homopolymer)

Acetal and Delrin are often used interchangeable when discussing engineering plastics. However, there are important distinctions between them. There are two types of acetal thermoplastic, copolymer acetal and homopolymer acetal. Delrin is a brand name and is an homopolymer acetal.


Main differences between acetal copolymer and Delrin:

  • Delrin is a specific brand and type of acetal.

  • Chemical Resistance: This is a major distinction between acetal copolymers and Delrin. Acetal is less susceptible to acidic or basic chemicals than Delrin. Acetal copolymer is free of centerline porosity Centerline porosity occurs during the manufacturing process and manifests as small voids, bubbles, or pores that are concentrated along the centerline or middle section of the plastic part., which allows for better wear properties in humid and wet environments such as food processing and medical applications. Delrin has centerline porosity.

  • Both acetal copolymer and Delrin have low coefficient of friction. However, Delrin has a lower coefficient of friction than acetal copolymers, and is an excellent choice when making parts that undergo prolonged repeated motion against another plastic or metal.

  • Both acetal copolymer and Delrin have a high tensile strength, but Delrin is a better choice for parts that undergo long periods of heavy load.

If acetal copolymer better suits your application or project, click on the Acetal Sheets Shop Now button below to view our stock sizes of acetal.

Acetal Sheets
Shop Now

Quantity discounts available!

We offer discounts on our listed prices
with the purchase of 2 or more stock sheets.

2 to 5 - 3% off
6 to 10 - 5% off
11 to 20 - 10% off
21 to 30 - 12% off
31 to 40 - 13% off
41 to 50 - 14% off
51 or more - 15% off


We can also cut to size!

For custom cut to size sheets of our Delrin, email [email protected] for a quote.
When describing the custom size, please include the thickness, width, length and quantity.


We also offer custom cut-to-size, hole drilling, edge polishing, CNC cutting, circle, and shape cutting. Request a quote for these services.